99
Setup Menu
Chap
te
r 7
Men
u
s
a) When maintenance menu item M 397 PORT CONFIGURATION is set to “VTR mode”.
a) Not displayed when the unit is in 23.98P mode.
158
PLAYBACK MODE FOR INTERNAL
Set whether to play multiple clips when playing clips in internal storage.
clip:
Plays single clips (clip mode).
continuous [cont]:
Plays multiple clips consecutively (continuous
playback mode).
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
“VTR mode”, the playback mode is set to “continuous” and this item is not
displayed.
159
PROXY GENERATOR
Set whether to generate proxy audio/video data when copying clips
without proxy AV data or partial clips to internal storage or UDF-format
SxS memory cards, or when uploading (PUT) from a computer using an
FTP connection.
disable [dis]:
Do not generate proxy audio/video data.
enable [ena]:
Generate proxy audio/video data.
160
INTER-MEDIA OVERLAP SELECT
Set the overlap duration between media when simultaneously recording
or copying to multiple memory cards.
off:
No overlap.
30 sec [30 s]:
30 seconds overlap.
1 min [1 m]:
1 minute overlap.
Menu items in the 200s, relating to the remote control interface
Item number
Item name
Settings
208
PROTOCOL FOR REMOTE(9P)
Select the protocol used with a REMOTE (9P) connector, for each port.
Sub-item
1
#2 (PB)
Select the protocol used with the playback port.
VTR:
Sony 9-pin VTR protocol
VDCP:
VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
“VTR mode”, the protocol is set to “VTR” and this sub item is not
displayed.
2
#1 (REC)
Select the protocol used with the recording port.
VTR:
Sony 9-pin VTR protocol
VDCP:
VDCP protocol
Note
When maintenance menu item M397 PORT CONFIGURATION is set to
“VTR mode”, the protocol is set to “VTR” and this sub item is not
displayed.
212
VIDEO REMOTE CONTROL
SELECT
a)
Select the method used to control the internal digital video processor
and to make related settings.
menu:
Use the setup menu to change settings.
remote (down converter) [dc]:
Control the down-converter from an
HKDV-900 or another device connected to the VIDEO CONTROL
connector.
remote (up converter) [uc]:
Control the up-converter from an HKDV-
900 or another device connected to the VIDEO CONTROL
connector.
Menu items in the 100s, relating to the control panels
Item number Item name
Settings
