115
Maintenance Menu
Chap
te
r 7
Men
u
s
1
IN 1
Set the command to be assigned to pin IN 1.
PB-STOP COMMAND [P.STP]
2
IN 2
Set the command to be assigned to pin IN 2.
PB-PLAY COMMAND [PLAY]
3
IN 3
Set the command to be assigned to pin IN 3.
PB-RECUE COMMAND [RECUE]
4
IN 4
Set the command to be assigned to pin IN 4.
off
5
OUT 1
Set the status to be assigned to pin OUT 1.
PB-PLAY STATUS [PLAY]
6
OUT 2
Set the status to be assigned to pin OUT 2.
off
7
OUT 3
Set the status to be assigned to pin OUT 3.
off
8
OUT 4
Set the status to be assigned to pin OUT 4.
ALARM STATUS [ALARM]
M3B: VANC RX
PARAMETER
M3B0: VANC RX
PACKET
For setting HD-SDI VANC data input parameters
Notes
• In 59.94i, 50i, 29.97P or 25P mode, selecting the line also selects the
corresponding line in the second field (for example, if line 9 is selected, line 572
is also selected for VANC packet reception).
• Menu item M3B0 enables recording of one VANC packet when the selected line
contains any packets whose DID/SDID matches the value set with this menu
item.
• Up to four packets are recorded per each line regardless of the DID and SDID
for the VANC set with menu item M3B1 or M3B2.
• It is not possible to set the same line with menu items M3B0, M3B1, and M3B2.
If the same line is specified, priority is given in the order of M3B0, M3B1, and
M3B2 (for example, if the same line is specified with M3B0 and M3B1, the
setting with M3B1 is ignored).
• When VANC data is output to HD-SDI playback signals, the number of the
output VANC line is the same as that of the input VANC line.
• When a UMID or essence mark line is selected with M3B1 or M3B2, UMID or
essence mark output takes priority. To disable UMID or essence mark output,
set setup menu item 651 or 657 to “off”.
Sub-item
1
LINE
Selects the LINE for the VANC to be received.
OFF, 9LINE to 20LINE
(59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE
(59.94P/50P mode)
2
DID
Specification of the DID of the VANC to receive
00h-FFh
3
SDID
Specification of the SDID of the VANC to receive
00h-FFh
M3B1: LINE1 SEL
Selects the LINE to be received for the HD-SDI VANC data.
OFF, 9LINE to 20LINE
(59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE
(59.94P/50P mode)
M3B2: LINE2 SEL
Selects the LINE to be received for the HD-SDI VANC data.
OFF, 9LINE to 20LINE
(59.94i/50i/29.97P/25P/23.98P mode)
OFF, 9LINE to 25LINE
(59.94P/50P mode)
M3D: DATE/TIME PRESET
Specifies the year, month, day, time, and time zone.
M3F: FACTORY SETUP
For details, refer to the Maintenance Manual.
M3: OTHERS: Other setting items
Item
Setting
