51
Handling Discs
Chapt
er
3
Pre
par
at
ion
s
a) Displayed when maintenance menu item M397 PORT
CONFIGURATION is set to “VTR Mode.”
b) The target operation mode is set using setup menu item 108 AUTO EE
SELECT.
c) Displayed when the optional XDBK-105 is installed and maintenance
menu item M397 PORT CONFIGURATION is set to “VTR Mode.”
P6 OTHER page
Handling Discs
Discs used for recording and
playback
This unit can record and play back the following
Professional Disc
1)
formats.
• PFD23A (capacity 23.3 GB)
• PFD50DLA (capacity 50.0 GB)
• PFD100TLA (capacity 100 GB)
• PFD128QLW (capacity 128 GB)
1) Professional Disc is a trademark of Sony Corporation.
• It is not possible to use the following discs for recording
or playback:
- Blu-ray Disc
- Professional Disc for Data
• PFD128QLW is a quad-layer Write-Once Professional
Disc (hereafter referred to as “quad-layer WO disc”).
Pay due attention to the following points.
- Even if you delete any files written to the disc, no
available storage space will be increased.
- Reformatting the disc will not increase the available
storage space.
- Repetitive file writing will consume the recordable
resource space (for writing the disc management data,
etc.) on the disc. If no available recordable resource
space is left on the disc, file writing may be disabled
even with sufficient available storage space remaining.
- No file can be written after the disc is finalized.
• PFD100TLA and PFD128QLW discs can be used only
by XDCAM devices with the XL-QD mark
(see the
following illustration)
. They cannot be used by XDCAM
devices without this mark.
• Management data and other information are also
included in the capacity for each disc. For information
about the actual usable capacity, see
in the Appendix.
F6:
PREREAD
c)
Selects whether to put the unit into
preread editing mode.
ON:
Put the unit into preread editing
mode.
OFF:
Do not put the unit into preread
editing mode.
Note
When you put the unit into preread editing
mode, the time data display area in the
display on the front panel of the unit is
divided into two sections, and “PREREAD,”
“AUDIO PREREAD,” or “VIDEO
PREREAD” appears in the lower section,
according to the setting of setup menu
item 319 PREREAD SELECT.
Item
Setting
F1: GOTO
Sets cue-up mode using a USB keyboard.
In cue-up mode, only F6: EXIT is
displayed. Select EXIT to exit cue-up
mode
.
Item
Setting
Notes
XL-QD mark
