49
Basic Operations of the Function Menu
Chapt
er
3
Pre
par
at
ion
s
a) This operation is supported only when TCG on page P4 TC of the function
menu is set to “INT”, and PRST/RGN is set to “PRESET”.
P1 INPUT page
a) When the maintenance menu item M22: OPTION SETTING >DVB-ASI
I/O is set to “on” with the optional PDBK-202 being installed
P2 INPUT page
a) When the maintenance menu item M22: OPTION SETTING >DVB-ASI
I/O is set to “on” with the optional PDBK-202 being installed
.
F5: MONITR R Selects the channel to monitor as the right
monitor channel.
CH1, CH2, CH3, CH4, CH5, CH6, CH7,
CH8
CH1/2, CH3/4, CH5/6, CH7/8 (MIX)
F6: OUT REF
Selects the reference signal for the output
signals of this unit.
REF:
Use the signal input to the REF.
VIDEO INPUT connector as the output
reference signal.
INPUT:
Use the input video signal as the
output reference signal.
Item
Setting
F1: INT SG
Set whether to select test signal from
internal signal generator.
OFF:
Do not select.
ON:
Select.
F2: V INPUT
Selects the video input signal.
HDSDI:
HD-SDI signal
SDSDI:
SD-SDI signal
DVB-ASI:
DVB-ASI TS signal
a)
Notes
• Test signal is input when INT SG on this
page is set to “ON” and setup menu item
710 is set to anything other than “off”.
• When the system frequency is 23.98P, the
setting is fixed “HDSDI”.
• When “DVB-ASI” is selected, the setting
for audio input signal is fixed to “DVB-
ASI”.
F3: A1 INPUT
Selects the audio input signal to assign to
audio channel 1.
SDI:
Audio signal embedded into SDI signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU1:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
DVB-ASI:
DVB-ASI TS signal
a)
Note
Test signals are input to all audio channels
1 to 8 when INT SG on this page is set to
“ON” and setup menu item 808 is set to
anything other than “off”.
F4: A2 INPUT
Selects the audio input signal to assign to
audio channel 2.
SDI:
Audio signal embedded into SDI signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU2:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 1/2 connectors
DVB-ASI:
DVB-ASI TS signal
a)
Item
Setting
F5: A3 INPUT
Selects the audio input signal to assign to
audio channel 3.
SDI:
Audio signal embedded into SDI signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU3:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
DVB-ASI:
DVB-ASI TS signal
a)
F6: A4 INPUT
Selects the audio input signal to assign to
audio channel 4.
SDI:
Audio signal embedded into SDI signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU4:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 3/4 connectors
DVB-ASI:
DVB-ASI TS signal
a)
Item
Setting
F1: A5 INPUT
Selects the audio input signal to assign to
audio channel 5.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU5:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6 connectors
DVB-ASI:
DVB-ASI TS signal
a)
F2: A6 INPUT
Selects the audio input signal to assign to
audio channel 6.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU6:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 5/6 connectors
DVB-ASI:
DVB-ASI TS signal
a)
F3: A7 INPUT
Selects the audio input signal to assign to
audio channel 7.
SDI:
Audio signal embedded into SDI
signal
ANALOG1:
Input signal to the ANALOG
AUDIO INPUT 1 connector
AES/EBU7:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 7/8 connectors
DVB-ASI:
DVB-ASI TS signal
a)
F4: A8 INPUT
Selects the audio input signal to assign to
audio channel 8.
SDI:
Audio signal embedded into SDI
signal
ANALOG2:
Input signal to the ANALOG
AUDIO INPUT 2 connector
AES/EBU8:
Signal input to the DIGITAL
AUDIO (AES/EBU) IN 7/8 connectors
DVB-ASI:
DVB-ASI TS signal
a)
F5: –
(Unassigned function button)
F6: –
(Unassigned function button)
Item
Setting
