background image

SERVICE MANUAL

Sony Corporation

Published by Sony Techno Create Corporation

SPECIFICATIONS

9-893-659-01

2013A33-1

© 

2013.01

AEP Model

UK Model

Australian Model

Ver. 1.0  2013.01

DIGITAL RADIO DAB/FM

XDR-S40DBP

NOTES  ON  CHIP  COMPONENT  REPLACEMENT

• 

Never reuse a disconnected chip component.

• 

Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.

SAFETY-RELATED  COMPONENT  WARNING!

COMPONENTS  IDENTIFIED  BY  MARK  

0

  OR  DOTTED  LINE  

WITH  MARK  

0

  ON  THE  SCHEMATIC  DIAGRAMS  AND  IN  

THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE  OPERATION.
REPLACE  THESE  COMPONENTS  WITH  SONY  PARTS 

 

WHOSE  PART  NUMBERS  APPEAR  AS  SHOWN  IN  THIS  
MANUAL  OR  IN  SUPPLEMENTS  PUBLISHED  BY  SONY.

Frequency range

 

DAB (Band-III):  174. 928 MHz 

 239 .200 MHz

 FM:  

87.5 

MHz   108 MHz ( 0.05 MHz step)

Intermediate frequency

 

DAB (Band-III):  2. 048 MHz

 

FM:  1.943 MHz

DAB (Band-III) frequency table (MHz)

Channel

Frequency

Channel

Frequency

Channel

Frequency

5A

174.928

8C

199.360

11C

220.352

5B

176.640

8D

201.072

11D

222.064

5C

178.352

9A

202.928

12A

223.936

5D

180.064

9B

204.640

12N

224.096

6A

181.936

9C

206.352

12B

225.648

6B

183.648

9D

208.064

12C

227.360

6C

185.360

10A

209.936

12D

229.072

6D

187.072

10N

210.096

13A

230.784

7A

188.928

10B

211.648

13B

232.496

7B

190.640

10C

213.360

13C

234.208

7C

192.352

10D

215.072

13D

235.776

7D

194.064

11A

216.928

13E

237.488

8A

195.936

11N

217.088

13F

239.200

8B

197.648

11B

218.640

Speaker:

 Approx .  6.6 cm dia., 8 

Ω

, monaural

Audio power output:

  0 .3  W

Output:

   (headphones) jack (ø 3.5 mm,  stereo mini jack)

Power requirements:

 6 V DC,  four LR6 (size AA) alkaline batteries

External power source:

 DC IN 6 V

Battery life (JEITA)*:

 

 

Approx .  13 hours for DAB,  10 hours for FM (Using Sony (LR6SG) alkaline batteries)

 

Approx .  11 hours for DAB,  9 hours for FM (Using Sony (NH-AA) Ni-MH batteries)

Dimensions:

 Approx . 180 mm × 95 mm × 36 mm (W/H/D) excl. projecting parts and controls

Mass:

 Approx .  445 g incl.  batteries

Supplied accessories:

  AC adaptor (1)

*  When listening through the speaker.  Measured by JEITA (Japan Electronics and Information Technology 

Industries Association) standards.  The actual battery life may  va ry depending on usage and circumstances.

Design and specifications are subject to change without notice.

Operate the unit only on the power sources specified in  “Specific ations. ”  For battery oper ation,  
use four LR6 (size AA) alkaline batteries.  For  AC operation,  use only the supplied  AC adaptor.
Do not use any other type of AC adaptor.
Failure to use the supplied  AC adaptor may cause the unit to malfunction, as 
the polarity of the plugs of other manufacturers may be different.
When operating the unit on batteries, it is  recommended that you remove the  AC adaptor from 
the wall outlet and the DC IN 6 V jack.  Disconnect the plug of the  external power source  before
operating the unit.

Summary of Contents for XDR-S40DBP





























Reviews: