Sony XDP-PK1000, Operating Instructions Manual

Page: 6 / 52

6
Cradle

Suction cup

SEEK

/

buttons *
1
*
2
Press to skip tracks.

Remote sensor

Indicator
You can check the status of the DSP
master unit.

VOLUME (VOL) +/– *
2

SOURCE/OFF button
Press to turn on the power/change the
source between a car audio unit and an
iPod/iPhone.
Press and hold more than two seconds
to turn off the system. The indicator
(

) turns off.

Port for the cradle cable
Used for connecting the cradle cable.

Cover for the suction cup

PUSH RELEASE button
Push to stretch the arm.

LOCK/RELEASE lever
Turn to lock/release the suction cup.

PUSH button
Press hard to secure the cradle on the
dashboard.

Tab
Pull up to remove the cradle from the
dashboard.
*1

has a tactile dot.
*2 These buttons work only when an iPod/
iPhone is selected as the source and the music
player on an iPod/iPhone is activated.
Indicator Status
Turns blue. A car audio unit is selected as
the source.
Turns red. An iPod/iPhone is selected as
the source.
Flashes blue. Diagnostic error. See
“Troubleshooting” (page 22).
Flashes red. Overload error when an
iPod/iPhone is selected as the
source. See
“Troubleshooting” (page 22).
Flashes blue
and red
alternately. Temperature detection is
working. See
“Troubleshooting” (page 22).