21
Specifications
DSP Master Unit
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 17 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 80 dBA
(reference: 1 Watt into 4 Ohms)
Power-AMP
Output:
Speaker outputs 4 CH
(Front L/R, Rear L/R)
Speaker impedance:
4 Ω – 8 Ω
Maximum power output:
45 W × 4 (at 4 Ω)
General
Outputs:
Audio output terminals: (Front/Rear)
Subwoofer output terminal (mono)
Power amplifier control terminal
Inputs:
iPod signal input terminal (dock connector)
Hi-level input terminal
Sound controls:
Bass/Treble ±7 dB
Fader/Balance ±7 steps
SUB-W /- 6Step , No sound
Power requirements:
12 V DC car battery
(negative ground (earth))
Dimensions:
(Mounting dimensions)
Approx. 210.6 mm × 40 mm × 156.6 mm
(8
3
/
8
in × 1
5
/
8
in × 6
1
/
4
in) (w/h/d)
Mass:
Approx. 0.92 kg (2 lb 1 oz)
Supplied accessories:
Card remote commander: RM-X251
Parts for installation and connections (1set)
Cradle
Dimensions:
(Mounting dimensions)
Approx. 65 mm × 138.8* mm × 107.8 mm
(2
5
/
8
in × 5
1
/
2
in × 4
1
/
4
in) (w/h/d)
Mass:
Approx. 0.14 kg (5 oz)
* Arm fully extended: 147.1 mm (5
7
/
8
in
) (h)
Amplifier
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION
AUDIO POWER SPECIFICATIONS
CEA2006 Standard
Power Output: 300 Watts RMS 4 at
4 Ohms < 1% THD+N
SN Ratio: 65 dBA
(reference: 1 Watt into 4 Ohms)
330 watts minimum continuous average
power into 4 ohms, 20 Hz to 100 Hz with no
more than 1.0% total harmonic distortion per
Car Audio Ad Hoc Committee standards.
Other Specifications
Circuit system:
Class D Technology
Pulse power supply
Input:
RCA pin jacks
Outputs:
Speaker terminals
Through out pin jacks
Suitable speaker impedance:
4 Ω – 8 Ω
Maximum outputs:
600 W (at 4 Ω)
Rated outputs (supply voltage at 14.4 V):
300 W
RMS (20 Hz – 100 Hz, 1.0 % THD + N, at 4 Ω)
SN Ratio:
65 dBA (Reference 1 W into 4 Ω)
Frequency response:
10 Hz – 120 Hz (
dB)
Harmonic distortion:
0.1 % or less (at 50 Hz, 4 Ω)
Input level:
1.0 V (RCA pin jacks)
Subsonic filter:
6 Hz, 12 dB/oct
Low pass filter:
120 Hz, 12 dB/oct
Power requirements:
12 V DC car battery
(negative ground)
Power supply voltage:
10.5 V – 16 V
Current drain:
at rated output: 25 A (at 4 Ω)
Remote input: 1 mA
Dimensions:
Approx. 356.8 mm × 55 mm ×
276.8 mm (14
1
/
8
in × 2
1
/
4
in × 11 in) (w/h/d)
not incl. projecting parts and controls
Mass:
Approx. 2.9 kg (6 lb 7 oz) not incl. accessories
Supplied accessories:
Parts for installation
Subwoofer
Speaker:
30 cm (12 in), cone type woofer
Enclosure:
Shielded type
Short-term Maximum Power
*
1
:
1,000 W*
2
Rated power:
300 W*
2
CEA2031, RMS Power:
420 W
Rated impedance:
4 Ω
Output sound pressure level:
86 ± 2 dB (1 W, 1 m)*
2
+0
-3
Summary of Contents for XDP-PK1000
