82
Setup Menu
Chapt
er
7
Menu
s
a) Not displayed when the unit is in 23.98P mode.
619
VITC
a)
Select whether to record the VITC generated by the internal timecode
generator during DVCAM recording.
off:
Do not record the internally generated VITC.
on:
Record the internally generated VITC.
Note
Even if this item is set to “off”, VITC is recorded if the input video signal
contains VITC and the VITC line is set to “thru” in menu item 723.
638
TIME CODE FOR VDCP CONTROL Make a setting for timecode generated when the REC INIT command or
CUE WITH DATA command is executed from a VDCP-compliant
controller.
REC:VDCP PB:TC [VDCP]:
Recording timecode is continuous timecode
starting from 00:00:00:00 generated in accordance with the VDCP
controller. Timecode for cueing is the same as clip timecode.
REC:TCG PB:TC [menu]:
Timecode for recording depends on the
settings of the menu items related to the timecode generator.
Timecode for cueing is the same as clip timecode.
REC:VDCP PB:Zero Base [VDCP/0]:
Recording timecode is continuous
timecode starting from 00:00:00:00 generated in accordance with the
VDCP controller. Timecode for cueing is generated taking
00:00:00:00 as the timecode value of the clip’s first frame.
REC:TCG PB:Zero Base [menu/0]:
Timecode for recording depends on
the settings of the menu items related to the timecode generator.
Timecode for cueing is generated taking 00:00:00:00 as the
timecode value of the clip’s first frame.
657
ESSENCE MARK SDI OUTPUT
Select whether to output essence marks in the SDI output VANC.
off:
Do not output.
on:
Output.
660
ESSENCE MARK SD VANC LINE
a)
Select the line to which to output essence marks when menu item 657 is
set to “on”.
12H, 13H, 15H, 16H, 17H, 18H, 19H (59.94i/59.94P/29.97P mode)
9H, 10H, 12H, 13H, 14H, 15H, 16H, 17H, 18H (50i/50P/25P mode)
665
ESSENCE MARK HD VANC LINE
Select the line to which to output essence marks when item 657 is set to
“on”.
9H to 17H to 20H (59.94i, 50i, 29.97P, 25P, 23.98P mode)
9H to 17H to 25H (59.94P, 50P mode)
Menu items in the 600s, relating to the timecode and metadata
Item number
Item name
Settings
