71
CIFS File Operations
Cha
p
te
r 6
F
ile
O
per
at
ions
CIFS File Operations
You can perform file operations using the Common
Internet File System (CIFS) between this unit and the
computer.
Preparations
See “Preparations” under “FTP File Operations”
(page 67).
Making CIFS connections
CIFS connections between this unit and a Windows
computer can be made with either of the following.
• Use Windows Explorer to map this unit as a network
drive
• Refer to this unit directly from Windows Explorer
The following describes the procedure for using Windows
Explorer to map this unit as a network drive.
1
Start Windows Explorer.
2
In the Tools menu, select “Map Network Drive...”.
The Map Network Drive dialog appears.
3
Enter “\\<IP address>\xdcam\” in the “Folder” field.
For example, if the IP address of this unit is set to
“192.168.001.010”, enter “\\192.168.1.10\xdcam\”.
4
Click on “Connect using a different name”.
The Connect As... dialog appears.
5
Enter the user name “admin” and the password, and
click OK.
The password is set to the model name (“pmw-1000”)
when the unit is shipped from the factory.
6
Click Finish.
The network drive allocation is complete when the
password is verified.
To break the connections
In Windows Explorer, select the network drive and right-
click it, then click “Disconnect”.
