Chap
te
Men
u
s
97
7-3 Extended Menu
7-3 Extended Menu
7-3-1 Items in the Extended Menu
The following tables show the items in the extended menu.
• Item names are the names which appear in the video
panel, and on an external monitor to which the output of
the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER)
connector is input.
An abbreviated name appears in the time data display
section when you press the NEXT button.
• The values in the Settings columns are the values which
appear in the time data display section. (The values may
appear in a different format in the video panel and on an
external monitor. In this case, the video panel values are
shown in parentheses.) Underlined values are the factory
defaults.
Menu items in the 100s, relating to the control panels
Item number Item name
Settings
101
SELECTION FOR SEARCH DIAL
ENABLE
Select how the unit enters the shuttle or jog mode.
dial (dial direct)
: Press the SHUTTLE or JOG button or, except during
recording/editing, turn the jog dial or shuttle dial.
key (via search key)
: Press the SHUTTLE or JOG button.
105
REFERENCE SYSTEM ALARM
Select whether or not to display a warning when the reference video
signal is not supplied or is out of phase with the input video signal.
off
: No warning.
on
: Flash the STOP button as a warning.
107
REC INHIBIT LAMP FLASHING
Select whether or not to flash the REC INHI indicator when recording is
prevented
(see “REC INHI (recording inhibited) indicator” on page 18)
.
off
: Light the REC INHI indicator.
on
: Flash the REC INHI indicator.
108
AUTO EE SELECT
When a disc is inserted, select the operation modes in which input video
and audio signals are automatically handled in E-E mode.
S/F/R (stop/f.fwd/f.rev)
: In stop/fast-forward/fast-reverse modes
stop
: In stop mode
off
: Do not put the unit into E-E mode automatically.
109
FORCED EE WHEN DISC UNLOAD When “off” is selected in menu item 108, during disc loading/unloading
and when no disc is inserted, select whether or not to control the output
signal PB/EE setting.
on
: Do not control (the signal is always an E-E signal).
off
: Control.
114
AUDIO MONITOR OUTPUT LEVEL
When “moni” is selected in menu item 820, select whether or not to
control the level of the audio signal output from the AUDIO OUT 1/3, 2/4
connectors with the volume control knob for the PHONES jack.
var (variable)
: Control.
fixed
: Do not control.
118
KEY INHIBIT
When the KEY INHI switch is set to ON, select which buttons can be
operated. The following sub-items control different sets of buttons
independently.
Sub-item
1
MON./INPUT SEL
Select whether the AUDIO MONITOR SEL, the AUDIO METER SEL, the
AUDIO INPUT CH, and the VIDEO INPUT SEL buttons are enabled.
dis
: Disabled.
ena
: Enabled.
2
CONTROL PANEL
Select whether all switches and buttons other than the buttons specified
with sub-item 1 and the MENU button are enabled.
dis
: Disabled.
ena
: Enabled.
121
FRAME PB MODE
Specify the frame mode for variable speed playback.
field:
Field playback
frame:
Frame playback. Compared to field playback, frame playback
gives still pictures with higher precision.
