Sony XDCAM PDW-700 Operation Manual Download Page 95

Page: 95 / 242

Overview

Chap

ions

in GUI

reen

You can perform scene searches, play the
searched scenes, and select scenes (edit clip list)
in Graphical User Interface (GUI) screens. The

GUI screens are your gateways to discs and the
data saved on discs.

The most important GUI screens are:

Clip thumbnail screen:

Displays thumbnails of

clips on the disc. “Clip” is displayed as the
title at the upper left of the screen

(see

page 96)

Clip list thumbnail screen:

Displays thumbnails

of sub clips in a clip list. “Clip List” is
displayed as the title at the upper left of the
screen

(see page 96)

There are also two playback screens:

Clip playback screen:

Playback screen for

normal video

Clip list playback screen:

Playback screen for

clip list video

You will use the THUMBNAIL/ESSENCE
MARK button

and the SUB CLIP/DISC

MENU button

to switch between these four

screens. Each press of these buttons switches
between the screens as shown in the following
figure. The THUMBNAIL and SUB CLIP
indicators light as follows, according to the type
of screen that is currently displayed.

Notes

•

To switch between these four screens, a disc
with recorded clips must be loaded in the unit.

• The GUI screens can display clip name, titles,

and other information in European languages
and Japanese, but they cannot display Chinese.

Chapter

Operations in GUI Screens

Overview

Switching between GUI screens

Summary of Contents for XDCAM PDW-700



















































































































































































































































Search results

Summary of Contents for XDCAM PDW-700

Reviews:

Brands by name

Popular brands

Sony XDCAM PDW-700, Operation Manual

Search results

Summary of Contents for XDCAM PDW-700

Reviews:

Brands by name

Popular brands