Sony XDCAM PDW-510, Operation Manual

Page: 21 / 222

21
2-1 Power Supply
Chapter
2
Locations and Functions
of Parts and Controls
2-1 Power Supply
a
Battery attachment
Attach a BP-GL65/GL95/L60S/M100 battery pack.
Furthermore, by attaching an AC-DN10 AC Adaptor, you
can operate the camcorder from AC power.
Note
For your safety, and to ensure proper operation of the unit,
Sony recommends the use of the following battery packs:
BP-GL65, BP-GL95, BP-L60S, and BP-M100.
b
DC IN connector (XLR type, 4-pin, male)
To operate the camcorder using an AC power supply,
connect an AC-550/550CE AC Adaptor with the DC
output cable supplied with the adaptor.
c
POWER switch
This switch turns the main power supply on and off.
d
LIGHT switch
This determines how a video light connected to the LIGHT
connector is turned on and off.
AUTO: When the switch on the video light is in the on
position, putting the camcorder in recording mode
turns the video light on automatically. When using the
auto interval recording mode, the video light is
automatically turned on immediately before recording
starts.
MANUAL: You can turn the video light on or off
manually, using its own switch.
Notes
• When AUTO is selected, unevenly lit video is recorded
between the start of recording and the time when the
light comes on. We recommend that you select
MANUAL when the start of a recording is important.
3 POWER switch
4 LIGHT switch
2
DC IN connector
1
Battery attachment