Cha
p
te
r 3
Pre
par
at
ion
s
44
3-4 Superimposed Text Information
a
Type of time data
Note
If the time data or user’s bits cannot be read correctly,
they will be displayed with an asterisk. For example,
“T*R”, “U*R”, “T*R.” or “U*R.”.
b
Time code reader drop frame mark (for 525 line
mode only)
“.”: Indicates drop frame mode
“:”: Indicates non-drop-frame mode
c
Time code generator drop frame mark (for 525 line
mode only)
“.”: Indicates drop frame mode (factory default setting)
“:”: Indicates non-drop-frame mode
d
VITC field mark
“ ” (blank): Fields 1 and 3 (for 525/60 mode) or fields 1, 3,
5 and 7 (for 625/50 mode)
“ * ”: Fields 2 and 4 (for 525/60 mode) or fields 2, 4, 6 and
8 (for 625/50 mode)
e
Menu setting states
1)
1) This is supported from firmware version 1.4.
f
Operation mode
The field is divided into two blocks as shown below.
• Block A displays the operation mode.
• Block B displays the servo lock status or playback speed.
g
Playback condition mark
One of three channel condition marks is displayed when
the ACCESS indicator is lit during any mode except
recording. The three channel condition marks indicate the
following three stages.
Display
Meaning
CNT
Counter data
TCR
TC reader time code data
UBR
TC reader user bits data
TCR.
VITC reader time code
UBR.
VITC reader user bits data
TCG
TC generator time code
UBG
TC generator user bits data
IN
IN point time data
OUT
OUT point time data
DUR
Duration between IN point and OUT
point
Display
Description
B1
The current menu settings are the same as
the settings in menu bank 1.
B2
The current menu settings are the same as
the settings in menu bank 2.
B3
The current menu settings are the same as
the settings in menu bank 3.
B4
The current menu settings are the same as
the settings in menu bank 4.
DF
The current menu settings are the same as
the factory defaults.
No display
The current menu settings are different from
all of the above.
Display
Operation mode
Block A
Block B
DISC OUT
Disc is not loaded.
LOADING
Disc is being loaded.
UNLOADING
Disc is being unloaded.
STANDBY OFF
Standby off mode
STOP
Stop mode
NEXT
Cuing up to the first frame of the
next clip.
PREV
Cuing up to the first frame of the
current clip.
F.FWD
Fast forward search
F.REV
Fast reverse search
PLAY
Playback mode (servo unlocked)
PLAY
LOCK
Playback mode (servo locked)
REC
Record mode (servo unlocked)
REC
LOCK
Record mode (servo locked)
JOG
STILL
A still picture in jog mode
JOG
FWD
Jog mode in forward direction
JOG
REV
Jog mode in reverse direction
SHUTTLE
STILL
A still picture in shuttle mode
SHUTTLE
(Speed) Shuttle mode
VAR
(Speed) Variable speed mode
TOP 0001/xxxx
Cuing up to the first frame of the
first clip.
END xxxx/xxxx
Cuing up to the last frame of the
last clip.
PREROLL
Cuing up during thumbnail search
B
A
Summary of Contents for XDCAM PDW-1500
