9
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
For the customers in the U.S.A.
This equipment has been tested and found to
comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable
protection against harmful interference when the
equipment is operated in a commercial
environment. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications. Operation
of this equipment in a residential area is likely to
cause harmful interference in which case the user
will be required to correct the interference at his
own expense.
You are cautioned that any changes or
modifications not expressly approved in this
manual could void your authority to operate this
equipment.
All interface cables used to connect peripherals
must be shielded in order to comply with the
limits for a digital device pursuant to Subpart B of
Part 15 of FCC Rules.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any
interference received, including interference that
may cause undesired operation.
For the customers in Canada
This Class A digital apparatus complies with
Canadian ICES-003.
For the customers in Europe
This product with the CE marking complies with
the EMC Directive issued by the Commission of
the European Community.
Compliance with this directive implies
conformity to the following European standards:
• EN55103-1 : Electromagnetic Interference
(Emission)
• EN55103-2 : Electromagnetic Susceptibility
(Immunity)
This product is intended for use in the following
Electromagnetic Environments: E1 (residential),
E2 (commercial and light industrial), E3 (urban
outdoors), E4 (controlled EMC environment, ex.
TV studio).
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan, Minato-ku, Tokyo,
108-0075 Japan.
The Authorized Representative for EMC and
product safety is Sony Deutschland GmbH,
Hedelfinger Strasse 61, 70327 Stuttgart,
Germany.
Інформація для споживачів в Україні.
Обладнання відповідає вимогам:
- Технічного регламенту обмеження
використання деяких небезпечних
речовин в електричному та
електронному обладнанні (постанова
КМУ від 03/12/2008 № 1057).
Precautions
If this product is installed incorrectly, personal
injury or damage to peripheral items may occur
due to fire, shock, or other accidental
circumstances. To avoid such risks, installation
should be performed by trained service
technicians.
To the technician installing this product
For installation instructions, please refer to the
INSTALLATION MANUAL supplied with this
product as well as this INSTALLATION GUIDE.
Note
Turn off the POWER switch on the XDS-1000/PD1000/
PD2000 Professional Media Station (hereinafter “XDS”)
before installing this product.
Operation
Refer to the OPERATION MANUAL supplied
with the XDS for instructions on how to operate
this product after installation.
English
GB
