47
Speaker configuration and
volume setup
Creating a virtual center speaker
— CSO
To fully enjoy surround sound, it is preferable to
have 5 speakers (front left/right, rear left/right,
center) and 1 subwoofer. CSO (Center Speaker
Organizer) allows you to create a virtual center
speaker even though a real center speaker is not
connected.
1
During DVD playback, touch the
display.
2
Touch .
The Disc Option menu appears.
3
Touch “CSO (Center Speaker
Organizer).”
The options appear.
4
Touch “CSO1,” “CSO2,” or “CSO3.”
The setting is complete.
To cancel CSO, touch “OFF” in step 4.
To return to the previous display, touch
.
Note
“CSO (Center Speaker Organizer)” is effective only
when “Multi Channel Output” is set to “Multi”
(page 55), as it is effective only for playback of multi-
channel sources.
Using rear speakers like
subwoofers — Rear Bass
Enhancer
Rear Bass Enhancer enhances the bass sound by
applying the low pass filter setting (page 52) to
the rear speakers. This function allows the rear
speakers to work like a pair of subwoofers if one
is not connected.
1
During reception/playback, press
(HOME)
, then touch “Settings.”
2
Touch .
The sound setting menu appears.
3
Move the scrollbar up and down, then
touch “RBE (Rear Bass Enhancer).”
The options appear.
4
Touch “RBE1,” “RBE2,” or “RBE3.”
The setting is complete.
To cancel RBE, touch “OFF” in step 4.
To return to the previous display, touch
.
Adjusting the speaker volume
You can adjust the volume level of each
connected speaker.
The adjustable speakers are “Front R” (Front
Right), “Front L” (Front Left), “Surround L”
(Rear Left), “Surround R” (Rear Right) and
“Subwoofer*.”
*
Adjustable only when a subwoofer is connected and
“Subwoofer” is set to “ON” (page 53).
1
While no source is selected, press
(HOME)
, then touch “Settings.”
2
Touch .
The sound setting menu appears.
3
Move the scrollbar up and down, then
touch “4.1ch Speaker Level.”
The setting display appears.
4
Touch the desired item, then +/– to
adjust the level.
Repeat this step to adjust each speaker’s
volume.
To restore the default setting, touch “Reset.”
To return to the previous display, touch
.
