40
Note
Depending on the cellular phone, connection may be
cut off when call transfer is attempted.
To adjust the volume for the other
party
1
Touch
, then “MIC Gain.”
2
Touch “Low,” “Middle,” or “High” to
adjust the level.
3
Touch
repeatedly to return to the
previous displays.
To end a call
Touch .
Phonebook management
You can store up to 500 contacts in the
phonebook and up to 5 phone numbers can be
registered to each contact.
Notes
•
Prior to disposal or changing ownership of your car
with this unit still installed, be sure to erase all the
phonebook data in this unit to prevent possible
unauthorized access, by doing any of the following:
– Delete the phonebook data by initializing
– Press the reset button.
– Disconnect the power supply lead.
•
Downloaded phonebook data from a cellular phone
cannot be overwritten by subsequent data. However,
some data (name, etc.), may be duplicated as a
result.
•
Phonebook data may be lost if this unit is damaged.
Selecting phonebook data
You can select the phonebook data of a cellular
phone, or the internal data on this unit.
1
Press
(HOME)
, then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch
, then “Phonebook Select.”
3
Touch the desired item.
To return to the previous display, touch
.
Storing phonebook data (When
“Internal” has been selected from
“Phonebook Select”)
You can send phonebook data from the
connected cellular phone and receive it on this
unit.
1
Press
(HOME)
, then touch “Phone.”
The Bluetooth Phone display appears.
2
Touch
, then “Receive Phonebook.”
This unit is ready for receiving phonebook
data.
3
Send the phonebook data by
operating the connected cellular
phone.
When receiving is complete, Bluetooth device
name appears and the phonebook data is
stored on this unit.
