Wireless Transmitter
WLA-NS7
Connecting the transmitter with BLUETOOTH
®
headphones
The process to register the information of a target device required for BLUETOOTH connection is called pairing.
To use a device in combination with the transmitter via a BLUETOOTH connection, it is necessary to pair the transmitter
with devices on an individual basis.
Before proceeding, make sure of the following:
Bring BLUETOOTH headphones within a distance of 1 m (3.2 ft) from the transmitter.
Connect the transmitter to a TV or an AC outlet with the supplied USB Type-C
®
cable.
To avoid any sudden loud sound output from the headphones, turn down the volume of the headphones.
Bring the operating instructions supplied with the headphones at hand for reference.
Note
Control over the headphones' volume is not available on any TV. Keep this in mind when using headphones without the volume
control feature.
Hint
The above instructions are provided as an example. For details, refer to the operating instructions supplied with your
headphones.
Press and hold the (BLUETOOTH) button on the transmitter for about 5 seconds.
The indicator on the transmitter starts double flashing in blue to indicate that the transmitter is in pairing mode.
1
Put your headphones into pairing mode to establish a BLUETOOTH connection with the transmitter.
When a BLUETOOTH connection is established, the indicator on the transmitter stops flashing and stays lit in blue.
If a BLUETOOTH connection is not established, repeat the procedure all over again from step
.
2
7
