Sony WI-SP600N Help Manual Download

Page: 17 / 114

Help Guide

Wireless Noise Canceling Stereo Headset

WI-SP600N

Charging the headset

The headset contains a lithium ion rechargeable battery. Charge the headset using the supplied micro-USB cable.

Hint

Charging is also possible by connecting the supplied micro-USB cable to a booted computer.

If charging starts while the headset is turned on, the headset will turn off automatically.

Note

Charging may not be successful depending on the USB AC adaptor.

Open the micro-USB port cover.

Connect the headset and an AC outlet.

Use the supplied micro-USB cable and a USB AC adaptor to connect them.

The indicator (red) of the headset lights up.
Charging is completed in about 1.5 hours (*) and the indicator (red) goes off automatically.

After charging is complete, disconnect the micro-USB cable, then close the micro-USB port cover securely to
prevent water or dust from entering the headset.

Time required for charging the empty battery to its full capacity. The time may be different depending on the conditions of use.

Summary of Contents for WI-SP600N











































































































Search results

Summary of Contents for WI-SP600N

Reviews:

Related manuals for WI-SP600N

Brands by name

Popular brands

Sony WI-SP600N, Help Manual

Search results

Summary of Contents for WI-SP600N

Reviews:

Related manuals for WI-SP600N

Brands by name

Popular brands