Sony WI-H700 Help Manual Download

Page: 14 / 106

Help Guide

Wireless Stereo Headset

h.ear in 2 Wireless (WI-H700)

Charging the headset

The headset contains a lithium ion rechargeable battery. Charge the headset using the supplied micro-USB cable.

Hint

If charging starts while the headset is turned on, the headset will turn off automatically.

Note

If the headset is not used for a long time, the battery may be quickly depleted, however, after a few recharges, the battery life will
improve.

Open the micro-USB port cover.

Connect the supplied micro-USB cable to the headset, and then connect the other end to a booted
computer.

The indicator (red) of the headset lights up.
Charging is completed in about 2.5 hours (*) and the indicator (red) goes off automatically.

After charging is complete, disconnect the micro-USB cable, then close the micro-USB port cover securely to
prevent water or dusts being mixed into the headset.

Time required for charging the empty battery to its full capacity. The time may be different depending on the conditions of use.

Summary of Contents for WI-H700





































































































Search results

Summary of Contents for WI-H700

Reviews:

Related manuals for WI-H700

Brands by name

Popular brands

Sony WI-H700, Help Manual

Search results

Summary of Contents for WI-H700

Reviews:

Related manuals for WI-H700

Brands by name

Popular brands