WHG-SLK2iV/WHG-SLK1iV.GB.4-286-485-11(1)
GB
G
etting S
tar
ted
FM/AM antennas
Find a location and orientation that
provide good reception when you set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord and the USB cable
to avoid picking up noise.
Power
Connect the power cord to a wall outlet.
If the supplied adaptor on the plug does
not fit your wall outlet, detach it from the
plug (only for models equipped with an
adaptor).
Speakers
Connect the speaker cords to the
SPEAKERS jacks.
Cancelling the automatic
demonstration
When you first turn on the system,
the demonstration screen appears
automatically.
To turn off the automatic demonstration
screen, follow the procedure below.
1
Select “Settings” from the home
menu, then press ENTER.
2
Select “Demonstration mode,”
then press ENTER.
The setting screen appears.
3
Press
/
repeatedly to select
“OFF,” then press ENTER.
Saving power in standby mode
This system enters standby mode
when you turn off the system using
the
/
button, minimizing the
power consumption automatically
(power saving mode). However, if
“Demonstration mode” has been enabled,
the system cannot enter power saving
mode. Be sure to turn off demonstration
mode to save power in standby mode.
Note
Be aware that the system cannot enter
power saving mode even if you turn on the
“Auto Standby” function (page 95) when
“Demonstration mode” has been enabled.
Summary of Contents for WHG-SLK1iV
Page 116: ...116GB Parental Control area code list ...
Page 123: ...Additional Information 123GB ...