Sony WH-XB910N, Help Manual

Page: 47 / 129

Help Guide
Wireless Noise Canceling Stereo Headset
WH-XB910N
Connecting to a paired computer (Windows 10)
Before starting the operation, make sure of the following:
Depending on the computer you are using, the built-in Bluetooth adaptor may need to be turned on. If you do not
know how to turn on the Bluetooth adaptor or are unsure if your computer has a built-in Bluetooth adaptor, refer to
the operating instructions supplied with the computer.
Wake the computer up if the computer is in standby (sleep) or hibernation mode.
1
Turn on the headset.
Press and hold the (power) button for about 2 seconds.
You will hear the voice guidance say, “Power on”. Check that the indicator (blue) continues to flash after you release
your finger from the button.
If the headset has automatically connected to the last connected device, you will hear the voice guidance say,
“Bluetooth connected”.
Check the connection status on the computer. If it is not connected, proceed to step 3.
2
Select the headset using the computer.
3
Right-click the speaker icon on the toolbar, then select [Open Sound settings].
1.
From the [Choose your output device] drop-down menu, select [Headphones (WH-XB910NStereo)].
2.
47