Sony WH-XB910N Help Manual Download

Page: 29 / 129

Help Guide

Wireless Noise Canceling Stereo Headset

WH-XB910N

Connecting to a paired Android smartphone

Unlock the screen of the Android smartphone if it is locked.

Turn on the headset.

Press and hold the

(power) button for about 2 seconds.

You will hear the voice guidance say, “Power on”. Check that the indicator (blue) continues to flash after you release
your finger from the button.

If the headset has automatically connected to the last connected device, you will hear the voice guidance say,
“Bluetooth connected”.
Check the connection status on the Android smartphone. If it is not connected, proceed to step 3.

Display the devices paired with the Android smartphone.

Select [Settings] - [Device connection] - [Bluetooth].

Touch the switch to turn on the Bluetooth function.

Touch [WH-XB910N].

Summary of Contents for WH-XB910N






















































































































Search results

Summary of Contents for WH-XB910N

Reviews:

Related manuals for WH-XB910N

Brands by name

Popular brands

Sony WH-XB910N, Help Manual

Search results

Summary of Contents for WH-XB910N

Reviews:

Related manuals for WH-XB910N

Brands by name

Popular brands