Digital Surround Headphone System
WH-L600
Warning beeps and operation beeps of the headphones
The status of the headphones is reported by the beeps as follows.
A short double-beep sounds repeatedly.
The headphones are not receiving the RF signal from the processor.
Use the headphones in the RF signal transmission area.
Turn on the processor.
Check the connections between the processor, the AC adaptor, and the AC outlet (mains).
Make sure there are no other wireless devices using the 2.4 GHz wireless frequency band, or there are no
electromagnetic waves being generated from a nearby microwave oven.
Change the processor position.
A long beep (about 2 seconds) sounds and the headphones turn off.
When the rechargeable battery of the headphones has been consumed, a warning beep (about 2 seconds) sounds
and the headphones are turned off. The headphones can be turned on even when there is no battery power
remaining, but they turn off almost immediately. Charge the headphones.
A short beep sounds and the headphones are turned on.
This indicates that the headphones have been turned on. This is not a malfunction.
A beep (about 0.5 seconds) sounds and the headphones are turned off.
This indicates that the headphones have been turned off properly. This is not a malfunction.
Three short, low-pitched beeps sound.
This indicates that you are trying to increase/decrease the volume when it is already maximum/minimum.
This beep does not sound when you control the volume with the TV's remote control.
4-732-288-11(3) Copyright 2018 Sony Corporation
39
