Digital Surround Headphone System
WH-L600
When connecting using OPTICAL IN jack (optical digital audio input)
You may need to make optical digital output settings on the device connected to the OPTICAL IN jacks of the
processor. Refer to the manual supplied with the device.
Connecting the OPTICAL IN jack on the processor to an optical digital output on your computer is not guaranteed to
work.
Notes on handling the optical digital cable
Do not drop objects on the optical digital cable or expose the cable to shock.
Grasp the plug to connect or disconnect the cable carefully.
Be sure that the ends of the optical digital cable are kept clean. Dust at the ends of the cable can degrade
performance.
When storing the cable, be careful not to fold or bend the optical digital cable with a bend radius less than 25 mm (1
in).
A: The bend radius of the optical digital cable should be no less than 25 mm (1 in).
4-732-288-11(3) Copyright 2018 Sony Corporation
24
