Wireless Stereo Headset
WF-XB700
Charging
The headset and the charging case contain built-in lithium-ion rechargeable batteries. Use the supplied USB Type-C
cable to charge the headset before use.
About the charging time
The required time for fully charging the left and right units of the headset is about 2.5 hours (*).
The required time for fully charging the charging case is about 3 hours (*).
Connect the charging case to an AC outlet.
Use the supplied USB Type-C cable and a commercially available USB AC adaptor.
The indicator (red) on the charging case lights up, and the charging case starts charging.
1
Set the headset into the charging case.
Put the left unit of the headset (the unit with the tactile dot) back into the left hole of the charging case, and put the
right unit of the headset back into the right hole of the charging case. Each unit of the headset will be set to the
correct position by the built-in magnet.
The indicators (red) on the headset light up, and the headset starts charging.
Close the lid of the charging case after setting the headset into the charging case.
After charging is complete, the indicators of the charging case and the left and right units of the headset turn off.
After charging is complete, disconnect the USB Type-C cable.
2
Time required for charging the empty battery to its full capacity. The charging time may differ depending on the conditions of use.
*
18
