Wireless Noise Canceling Stereo Headset
WF-1000XM3
Pairing and connecting with an Android smartphone
The operation to register the device that you wish to connect to is called “pairing”. First, pair a device to use it with the
headset for the first time.
Before you start the pairing operation, make sure that:
The Android smartphone is placed within 1 m (3 feet) of the headset.
The headset is charged sufficiently.
The operating instructions of the smartphone is in hand.
Remove both units of the headset from the charging case.
The headset turns on automatically. Check that the indicator (blue) flashes.
1
Enter pairing mode on this headset.
When you pair the headset with a device for the first time after purchase or after initializing the headset (if the
headset has no pairing information), the headset enters pairing mode automatically if you remove the headset from
the charging case. In this case, wear the headset and proceed to step 3.
When you pair a second or subsequent device (if the headset has pairing information for other devices), put the
headset in both ears, then hold your fingers to the touch sensors on both the left and right units for about 7
seconds.
You will hear voice guidance “Bluetooth pairing” from the left unit.
2
Unlock the screen of the Android smartphone if it is locked.
3
30
