Sony WEGA KV-27FS100L, Operating Instructions Manual

Page: 33 / 55

Using the Menus
25
Using the Audio Menu
Treble
Press G to decrease the higher pitched sounds. Press g to increase the higher
pitched sounds.
Bass
Press G to decrease the lower pitched sounds. Press g to increase the lower
pitched sounds.
Balance
Press G to emphasize the left speaker. Press g to emphasize the right speaker.
Steady Sound
Stabilizes volume
Press F or f to select one of the following options:
On:
Select to stabilize the volume when changing channels.
Off:
Select to turn Steady Sound off.
Effect
Use the F or f buttons to highlight one of the following options, then press
to select it.
Surround:
Simulates theater quality sound for stereo programs.
Off:
Normal stereo or mono reception.
Options
Use this features to change your Audio setting.
MTS
Multi-Channel
TV Sound
Use the F or f buttons to highlight one of the following
options, then press to select it.
Stereo:
Select when viewing a broadcast in stereo.
Auto SAP:
Select to have the TV automatically switch to a
Second Audio Program (SAP) when a signal is
received.
Mono:
Select to reduce noise in areas of poor
reception.
To access the Audio menu, use the following steps:
To Display To Highlight To Select
Press f to highlight an option; then press .
Audio
Steady Sound: Off
Bass
Effect: Off
Balance
Options
Move Select End
Treble
✍
Press to directly select Effect settings (Surround, Off).
✍
Press to directly select MTS settings (Stereo, Auto SAP, Mono).
✍
If your TV is set to Auto SAP, some programs may be muted or distorted. If your TV does not output
sound, change your Audio MTS setting to Stereo or Mono.