Sony WEGA KLV 21SR2, Operating Instructions Manual

Page: 68 / 312

66
Additional Information
Using Optional Equipment
For mono equipment
Connect the phono plug to the L/G/S/I jack and press / repeatedly until the input symbol 3
or 3 appears on the screen.
Select the “Sound Adjustment” menu and set “Dual Sound” to “A” (see page 35).
“Memory Stick” input (KLV-23HR2 only)
To view still images or moving images stored on a “Memory Stick” inserted into the “Memory Stick” slot
G
, press (“Memory Stick”) on the remote control.
“MEMORY STICK” appears on the screen when you press (“Memory Stick”).
For more details on using “Memory Stick” media, refer to “Using the “Memory Stick” (Memory Stick
Home)” on page 55.
1
Connect your equipment to the designated TV socket, as indicated on pages 63 to 65.
2
Switch on the connected equipment.
3
To watch the picture of the connected equipment, press the / button on the remote control
repeatedly until the correct input symbol appears on the screen.
Symbol Input Signals
1 or 2 • Audio/video input signal through the Scart connector
J
or
I
.
1 • RGB input signal through the Scart connector
J
. This symbol appears only if
an RGB source has been connected.
2 • S video input signal through the Scart connector
I
.
3 • Video input signal through the phono jack
C
and audio input signal through
D
.
3 • S video input signal through the S video input jack
B
and audio input signal
through
D
.
4
Press the button on the remote control to return to the normal TV picture.
S
S
S