Sony WEGA KE-MV42A1 Operating Instructions Manual Download

Page: 39 / 52

Addi

tion
al

rm
at

Additional Information

Troubleshooting

If you have any problem while viewing your TV, please check the following troubleshooting guide. If the
problem persists, contact your Sony dealer.

Symptom

Possible cause

Solutions

Page

Snowy picture

Noisy sound

• The connection is loose or the

cable is damaged.

• Check the antenna cable and connection

on the TV, VCR and on the wall.

—

• Channel presetting is

inappropriate or incomplete.

• Display the “Set Up” menu and select

“Manual Program” to preset the channel
again.

• The antenna type is

inappropriate.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

—

• The antenna direction needs

adjustment.

• Adjust the antenna direction. Contact a

Sony dealer for advice.

—

• Signal transmission is low.

• Try using a booster.

—

Distorted picture

Noisy sound

• Broadcast signals are too

strong.

• Turn off or disconnect the booster if it is

in use.

—

Good picture

Noisy sound

• The TV system setting is

inappropriate.

• If the sound of all the channels are noisy,

display the “Set Up” menu and select
“Auto Program” to preset the channels
again.

• If the sound of some channels is noisy,

select the channel, then display the “Set
Up” menu and select “Manual Program”,
then select the appropriate TV system.

continued

Summary of Contents for WEGA KE-MV42A1





















































Search results

Summary of Contents for WEGA KE-MV42A1

Reviews:

Related manuals for WEGA KE-MV42A1

Brands by name

Popular brands

Sony WEGA KE-MV42A1, Operating Instructions Manual

Search results

Summary of Contents for WEGA KE-MV42A1

Reviews:

Related manuals for WEGA KE-MV42A1

Brands by name

Popular brands