Ad
va
nce
d
Op
era
tions
19
Advanced Operations
Sleep Timer Function
The Sleep Timer function allows you to set the TV
to switch itself automatically to the standby mode
after a specified time period. You can select the
time period from among 15 minutes, 30 minutes,
45 minutes, 60 minutes, 75 minutes and 90
minutes.
To set the Sleep Timer function
Press
on the remote control repeatedly until the
desired time period (“15 M,” “30 M,” “45 M,”
“60 M,” “75 M,” or “90 M”) appears on the
screen.
When the Sleep Timer function is on, the
(Sleep) indicator on the TV lights up in red.
To cancel the Sleep Timer function
Press
repeatedly until “Off” appears on the
screen.
Notes
• If you switch off the TV and switch it on again, the
Sleep Timer function is reset to “Off.”
• The message “TV will turn off soon.” appears on the
screen one minute before the TV switches to the
standby mode. Note that this message will not appear
when the TV is in the Teletext mode.
• If you press
/
on the remote control, the
remaining time in minutes before the TV switches to
the standby mode is displayed on the screen.
Picture Off Function
The Picture Off function allows you to listen to the
sound from TV or DVDs with the picture on TV
screen switched off.
To turn off the picture
Press
on the remote control. The picture is
switched off and the sound remains unchanged.
When the Picture Off function is on, the
(picture off) indicator on the TV lights up in blue.
To cancel the Picture Off function
Press any button (except the VIDEO
I
/
1
, MODE,
REC,
2
+/–,
%
or
9
buttons) on the remote
control.
Summary of Contents for WEGA KE-MV42A1
Page 51: ......
