U
si
ng You
r Ne
w TV
11
Step 3:
Insert the Batteries into
the Remote Control
Notes
• Make sure you insert the supplied batteries observing
the correct polarity.
• Always remember to dispose of used batteries in an
environmentally friendly way.
• Do not use different types of batteries together or mix
old and new batteries.
Step 4:
Set Up Your TV
Automatically
The first time you turn on your TV, a sequence of
menu screens appears on the TV enabling you to:
1) choose the language of the menu screen, and 2)
search and store all available channels (TV
Broadcast).
However, if you need to change any of these
settings at a later date, you can do so by selecting
the appropriate option in the “Set Up” menu (see
page 35).
1
Connect the TV to the AC outlet (110–240 V
AC, 50/60 Hz).
2
Press the
1
(Power) switch on the TV to
switch it on.
The first time you switch on the TV, the
Language menu appears automatically on the
screen (Auto Startup).
Note
• To perform Auto Startup later, press
0
on the
rear panel of the TV.
3
Press
v
/
V
on the remote control to select
the language, then press OK to confirm
your selection.
From now on, all the menus will appear in the
selected language.
m
Language
Select Language
,
continued
Summary of Contents for WEGA KE-MV42A1
Page 51: ......
