manualshive.com logo in svg

Sony Wega KE-MR50, Operating Instructions Manual, Page: 2 / 124

Share
Download
Sony Wega KE-MR50 Operating Instructions Manual Download Page 2

2

30cm

10cm

10cm

10cm

Safety Information

For Safety

AC power cord and display cable

Unplug the AC power
cord and display cable
when moving the TV set.
Do not move the TV set
with the AC power cord
and display cable
plugged in. It may damage the AC power cord
and display cable and result in fire or electric
shock. If the TV set has been dropped or
damaged, have it checked immediately by
qualified service personnel.

Medical institution

Do not place this TV
set in a place where
medical equipment is
in use. It may cause
malfunction of
medical instruments.

Installation and moving

Ventilation

Never cover the ventilation holes
in the cabinet. It may cause
overheating and result in fire.
Unless proper ventilation is
provided, the TV set may gather
dust and get dirty. For proper
ventilation, observe the following:

• Do not install the TV set turned backward or

sideways.

• Do not install the TV set turned over or

upside down.

• Do not install the TV set on a shelf or in a

closet.

• Do not place the TV set on a rug or bed.
• Do not cover the TV set with cloth, such as

curtains, or items such as newspapers, etc.

Vehicle and ceiling

Do not install this TV set
in a vehicle or hang it
from the ceiling.
Bumping of the vehicle
may cause the TV set to
fall down and cause
injury.

Water and moisture

Do not use this TV set near water - for example,
near a bathtub or shower room. Also do not
expose to rain. It may result in fire or electric
shock.

Outdoor use

Do not install this TV set
outdoors. If the TV set is
exposed to rain, it may
result in fire or electric
shock. If the TV set is
exposed to direct
sunlight, the TV set may
heat up and it may
damage the TV set.

Ship and vessel

Do not install this TV set
in a ship or vessel. If the
TV set is exposed to
seawater, it may cause
fire or damage the TV
set.

Cord arrangement

Arrange the power cords or connecting cords in
a safe place to avoid tripping on them.

Ventilation

Leave space around the display unit and media
receiver unit. Otherwise, adequate air-circulation
may be blocked causing overheating and cause
fire or damage the TV set.

When installing the display unit
on the wall

Leave this space at least.

Summary of Contents for Wega KE-MR50





























































































































Reviews:

No comments