Sony Wega KE-MR50 Operating Instructions Manual Download Page 108

Page: 108 / 124

108

Additional Information

• Check the antenna cable and

connection on the media receiver
unit, VCR and on the wall.

• Display the “Channel Setup” menu

under the “Setup” menu and select
“Manual Program” to preset the
channel again.

• Check the antenna type (VHF/UHF).

Contact a Sony dealer for advice.

• Adjust the antenna direction. Contact

a Sony dealer for advice.

• Try using a booster.

• Turn off or disconnect the booster if it

is in use.

• If the sound of all the channels are noisy,

display the “Channel Setup” menu under
the “Setup” menu and select “Auto
Program” to preset the channels again.

• If the sound of some channels is noisy,

select the channel, then display the
“Channel Setup” menu under the
“Setup” menu and select “Manual
Program”, then select the appropriate TV
system (“TV System”).

• Check the power cord, antenna and

the VCR connections.

• Press

on the remote.

• Press

on the media receiver unit to

turn off the TV for about 5 seconds,
then turn it on again.

Additional Information

Troubleshooting

If you have any problem while viewing your TV, please check the following
troubleshooting guide. If the problem persists, contact your Sony dealer.

Possible cause

Symptom

Solutions

• The connection is

loose or the cable is
damaged.

• Channel presetting

is inappropriate or
incomplete.

• The antenna type is

inappropriate.

• The antenna

direction needs
adjustment.

• Signal transmission

is low.

• Broadcast signals

are too strong.

• The TV system

setting is
inappropriate.

• The power cord,

antenna or VCR is
not connected.

• The TV is not turned

on.

Page

–

Snowy picture

Noisy sound

Distorted picture

Noisy sound

Good picture

Noisy sound

No picture

No sound

Summary of Contents for Wega KE-MR50





























































































































Search results

Summary of Contents for Wega KE-MR50

Reviews:

Sony Wega KE-MR50, Operating Instructions Manual, Page: 108 / 124

Search results

Summary of Contents for Wega KE-MR50

Reviews: