29
GB
KDE-W50A11E
2-657-531-
11
(1)
Usi
ng t
he
M
enu
Sets a signal to be output through the socket labelled
/
2 on the rear of the TV. If
you connect a VCR or other recording equipment to the
/
2 socket, you can then
record from the equipment connected to other sockets of the TV.
1
Press OK to select “AV2 Output”.
2
Press
M
/
m
to select one of the following, then press OK.
Auto: Outputs whatever is being viewed on the screen.
TV Analog: Outputs an analogue broadcast.
TV Digital: Outputs a digital broadcast.
AV1: Outputs signals from equipment connected to the
/
1 socket.
AV3: Outputs signals from equipment connected to the
/
3 socket.
AV6: Outputs signals from equipment connected to the
6/
6 socket.
Switches off the picture. You can still listen to the sound with the picture off.
1
Press OK to select “Picture Off”.
2
Press
M
/
m
to select “On”, then press OK.
The
(Picture Off) indicator on the TV (front) lights up in green. To restore the
picture, press any buttons (except
2
+/- and
9
).
Illuminates the SONY logo on the TV (front).
1
Press OK to select “Logo Illumination”.
2
Press
M
/
m
to select “Yes”, then press OK.
AV2 Output
Picture Off
Logo Illumination
010COV.book Page 29 Tuesday, September 6, 2005 11:47 AM
