Advanced Operation
Advanced Operation
25
Detail Set Up menu
Auto Format
This TV can detect the type of screen format being transmitted by the
broadcaster (only if the specific signals are transmitted with the program). This
option allows the TV to automatically switch to the correct screen mode.
With the ‘Auto Format’ option highlighted, press the
b
button to adjust. Press the
V
or
v
button to select ‘On’ or ‘Off. Press the OK button to store.
Noise Reduction
Sometimes a weak signal can produce a snowy picture (called picture noise).
This option can help to reduce this effect.
With the ‘Noise Reduction’ option highlighted, press the
b
button to adjust. Press
the
V
or
v
button to select ‘Auto’ or ‘Off. Press the OK button to store.
AV2 Output
This option allows you to set a signal to be output through the socket labelled
i
2/
r
on the rear of the TV. If you connect a VCR to the
i
2/
r
socket, you
can then record from equipment connected to other sockets of the TV.
z
For example, to record from a camcorder to a video tape:
Connect a camcorder to the
t
3 sockets on the front of the TV and a VCR to the
i
2/
r
socket on the rear of the TV. Set the ‘AV2 Output’ option to ‘AV3’. Press
the
t
/
button repeatedly until
t
2 is displayed. Press ‘PLAY’ on the
camcorder. The picture is sent through the AV2 socket to the VCR. Change the
channel on the VCR until the picture from the camcorder appears. Press
‘RECORD’ on the VCR.
With the ‘AV2 Output’ option highlighted, press the
b
button to adjust. Press the
V
or
v
button to select ‘Auto’, ‘TV’, ‘AV1’, ‘AV3’ or ‘YC3’. Press the OK button to
confirm.
Setting
Function
Auto
Outputs whatever is being viewed on the TV screen.
TV
Outputs the TV broadcast you are watching.
AV1
Outputs signals from equipment connected to the
i
1/
socket.
AV3
Outputs signals from equipment connected to the
t
3 socket.
YC3
Outputs signals from equipment connected to the
r
3 socket.
YUV Centring (only available when the TV is receiving a YUV signal)
When viewing a YUV signal from equipment connected to the
i
1/
socket
(e.g. DVD player, PlayStation2), the picture position may need some adjusting.
This option allows you to adjust the horizontal picture position so that the picture
is in the middle of the screen.
With the ‘YUV Centring’ option highlighted, press the
b
button to adjust. Press
the
V
or
v
button to adjust the fine tuning over a range of -10 to +10. Press the
OK button to store.
Picture Rotation
Due to the Earth’s natural magnetism, the picture might look slanted. This option
allows you to cancel this effect.
With the ‘Picture Rotation’ option highlighted, press the
b
button to adjust. Press
the
V
or
v
button to adjust the fine tuning over a range of -5 to +5. Press the
OK button to store.
Detail Set Up
Auto Format:
Noise Reduction:
AV2 Output:
YUV Centring:
Picture Rotation:
OK
On
Auto
TV
0
0
The ‘Detail Set Up’ menu.
