– 12 –
Tracking Adjustment
1. Turn ON the WIRELESS switch.
2. Press
œ
REPEAT button (Tape is unnecessary)
3. Adjust L1 (Rch) and L2 (Lch) for adjustment value on the
TP18 (OUT2)
Adjutment value:
* Repeat the procedures in each adjustment several time, and check
the frequency.
* If frequency is not fit, from set CH1 of the wireless receiver.
Adjustment points:
TMR board – side B –
TMR section
TP18
(OUT2)
spectrum
analyzer
Adjustment point
CH1
L1 (Rch)
243.25MHz ± 20kHz
L2 (Lch)
243.71MHz ± 20kHz
ANT3
ANT1
RV1
IC1
L1
L2
ANT2
TP18
(OUT2)
