WALKMAN
NWZ-ZX1
Pairing (registering) a Bluetooth device
To connect with a new Bluetooth device, you need to pair with it while the Bluetooth function of your Walkman is
on.
You only need to do this once between the Walkman and the new Bluetooth device. Just turn on the device the
next time.
1. Put the Bluetooth device you want to connect with in discoverable mode.
Refer to the operating instructions supplied with the Bluetooth device for details on procedures for putting it in
detectable mode.
2. In the Home screen, tap - [Settings] - [ Bluetooth].
3. Tap the device you want to pair with from the list. If a number is displayed on the screen of your Walkman, make
sure the same number is displayed on that device.
The pairing and connection status will be displayed under the Bluetooth device name.
With some devices, a connection is established after pairing.
Hint
If the Bluetooth device you want to connect with has the NFC function, pairing and connection are completed with
one-touch.
Note
A passkey (*1) input screen is displayed for some devices. Check the passkey of the other device, and input the
passkey.
(*1)
“Passkey” is also called “Pass code,” “PIN code,” “PIN number,” or “Password.” For the passkey of the other device, refer
to the manual of that device.
Related Topic
How to Use
158
