Digital Music Player
NW-WM1A/WM1Z
Using the HOLD switch
You can lock the Walkman to prevent accidental button operation.
To enable the screen operation
You can enable the touch-screen operation while the HOLD function is active.
Hint
Slide the switch (
) in the opposite direction of the arrow to release the HOLD function.
While the HOLD function is active,
will flash when you operate a button.
When the HOLD function is enabled, you cannot turn off the Walkman. Release the HOLD function.
Slide the switch ( ).
The HOLD function is enabled. You cannot operate the buttons on the Walkman or the touch screen. Only the button (
) is
active and you can use it to perform the following operations.
Turning the screen on or off.
Turning on the Walkman (3 seconds).
Restarting the Walkman (8 seconds).
1
Tap the menu items in the following order.
– [Settings] – [Device Settings] ([Basic Settings]).
1.
Tap [Disable touch panel when the HOLD switch is on] to remove a check mark.
If you want to prevent accidental touch-screen operations, add a check mark again.
2.
14
