83
While using group function
Others
Symptom
Cause/Remedy
The group
function does not
operate.
• While using a disc without group setting, an attempt was made to
select some group-related menu.
,
Use a disc with group setting.
A track cannot be
recorded to a new
group. A new
group cannot be
created.
• This is due to the MiniDisc system limitations. Group information
has been written to the area where the disc name is stored. The disc
name and track names are recorded in the same area, which can
store a maximum of approximately 1,700 characters. If the total
number exceeds this amount, a new group cannot be created even
though group mode is on. It is also impossible to make group
settings at this time.
Symptom
Cause/Remedy
The recorder does
not work or works
poorly.
• The rechargeable battery is not charged.
,
Charge the rechargeable battery.
• The volume is low.
,
Turn up the volume.
• No disc is inserted.
,
Insert a recorded disc.
• The HOLD function is turned on (“HOLD” appears in the display
when you press an operation button on the recorder).
,
On the recorder, disable HOLD by sliding the HOLD switch to
the opposite direction of the arrow
.
• The lid is not firmly closed.
,
Close the lid until it clicks. Then slide OPEN to open the lid.
• Moisture has condensed inside the recorder.
,
Take the MD out and leave the recorder in a warm place for
several hours until the moisture evaporates.
• The AC power adaptor is not firmly connected.
,
Connect the AC power adaptor firmly to the DC IN 3V jack on
the recorder or the battery charging stand and to the house
current.
• The rechargeable battery or dry battery is weak (“LOW BATT”
flashes or nothing appears).
,
Charge the rechargeable battery or replace the dry battery with
a new one (page 16), or use the supplied AC power adaptor.
• The dry battery have been inserted incorrectly.
,
Insert the battery correctly (page 17).
Summary of Contents for Walkman MZ-N910
Page 128: ...Printed in Japan ...