Sony Walkman MZ-N910 Page 77 Operating Instructions Manual Download | Manualshive

Page: 77 / 128

background image

77

Troubleshooting and explanations

Troubleshooting

If a problem occurs during recorder operation, follow the steps described below before
consulting the nearest Sony dealer. If any messages appear, it is recommended to take
notes.

1

Check to see if the problem is listed in, “Troubleshooting” (page 77).

Check “Messages” (page 85) for the problem as well.

2

If after step 1 you still cannot solve the problem, consult your nearest Sony dealer.

While charging

Symptom

Cause/Solution

The rechargeable
battery does not
start charging. The
rechargeable battery
cannot be fully
charged.

• The rechargeable battery or the dry battery has been inserted

incorrectly or the AC power adaptor has been connected
incorrectly.

,

Insert the battery correctly or connect the AC power adaptor
correctly.

• The terminals of the battery charging stand is dirty.

,

Clean the terminals with a dry cloth.

• Because of the battery’s characteristics, the capacity of the

rechargeable battery may be smaller than normal when it is used
for the first time or after a long period of disuse.

,

Charge and discharge the battery several times. The normal
battery life will be restored.

• The rechargeable battery is drained (nothing appears in the

display window).

,

Charge the rechargeable battery. It takes one minute after
placing the recorder on the battery charging stand for an
indication to appear and charging to start. If charging does not
start even after a minute, replace the recorder on the battery
charging stand again.

The rechargeable
battery has become
drained even when
the recorder was not
used for a while.

• The quick mode was set to “QUICK”.

,

If you set the quick mode to “QUICK”, the power stays on
inside recorder even when there is no operation, causing the
battery life to shorten. If the battery is not fully charged, the
rechargeable battery may become drained after a while. If this
happens, charge the rechargeable battery again (page 63).

Even when fully
charged, the life of
the battery is only
about half what it
normally is.

• The useful life of the rechargeable battery may be ending.

,

Replace the rechargeable battery with the new one.

«
...
75
76
77
78
79
...
»

Summary of Contents for Walkman MZ-N910

































































































































Reviews:

No comments

Related manuals for Walkman MZ-N910

Brand: Faroudja Pages: 15

Brand: IceTech Pages: 4

Brand: NAIM Pages: 27

Brand: Sandstrom Pages: 220

Brand: SanDisk Pages: 39

Brand: Aiwa Pages: 15

Brand: Iaudio Pages: 209

PerfectWave SACD Transport

Brand: PS Audio Pages: 24

Brand: Nikkei Pages: 12

Brand: Celabs Pages: 2

DCM 290 - CD / MP3 Changer

Brand: Denon Pages: 16

Cassette Deck 6130

Brand: NAD Pages: 3

Brand: Bladelius Pages: 6

Brand: Sveon Pages: 45

Brand: Technics Pages: 37

Brand: Gembird Pages: 14

Brand: NAD Pages: 41

Brand: NAD Pages: 12

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands