manualshive.com logo in svg

Sony Walkman MZ-N520, Operating Instructions Manual, Page: 62 / 96

Share
Download
Sony Walkman MZ-N520 Operating Instructions Manual Download Page 62

62

Others

Symptom

Cause/Remedy

The recorder does 
not work or works 
poorly.

• The rechargeable battery is not charged.

,

Charge the rechargeable battery.

• The volume is low.

,

Turn up the volume.

• No disc is inserted.

,

Insert a recorded disc.

• The HOLD function is turned on (“HOLD” appears in the display 

when you press an operation button on the recorder).

,

On the recorder, disable HOLD by sliding the HOLD switch to 
the opposite direction of the arrow.

• The lid is not firmly closed.

,

Close the lid until it clicks. Then slide OPEN to open the lid.

• Moisture has condensed inside the recorder.

,

Take the MD out and leave the recorder in a warm place for 
several hours until the moisture evaporates.

• The rechargeable battery or dry battery is weak (“LoBATT” 

flashes or nothing appears).

,

Charge the rechargeable battery or replace the dry battery with 
the new one, or connect the supplied AC power adaptor to the 
recorder.

• The dry battery have been inserted incorrectly.

,

Insert the battery correctly.

• The disc is damaged or does not contain proper recording or 

editing data.

,

Reinsert the disc. Rerecord the disc. If the error message still 
appears, replace it with another disc.

• While operating, the recorder received a mechanical shock, too 

much static, abnormal power voltage caused by lightning, etc.

,

Restart the operation as follows.

1

Disconnect all the power sources.

2

Leave the recorder for about 30 seconds.

3

Connect the power source.

The recorder will 
not play.

• A Hi-MD disc or a standard disc in Hi-MD mode is inserted.

,

Hi-MD discs or standard discs in Hi-MD mode cannot be 
played on this recorder.

Summary of Contents for Walkman MZ-N520

































































































Reviews:

No comments