Sony VSPA-D7, Setup Instructions, Page: 6 / 21

6
Settings Required Before Installation
When a proxy server is not to be used on the
network that is used during operation
Proceed to step 8 when the “Internet Options” window
returns.
When a proxy server is to be used on the network
that is used during operation
The “Proxy Settings” window appears.
6
Make the following settings in the “Proxy Settings”
window.
7
Click [OK] in the “Local Area Network (LAN)
Settings” window.
The “Internet Options” window returns.
8
Click [OK] in the “Internet Options” window.
Settings for the Entire System
Use the “System Setup” window to make the settings that
relate to the system as a whole. These include the storage
location of content, schedules, and settings that the VSPA-
D7 software manages, the times for turning the players
used in the system on and off, and whether to always
synchronize the players’ clocks with the computer that is
running the VSPA-D7 software.
The “System Setup” window appears automatically the
first time that setup is performed after installation.
Start the VSPA-D7 software, by double-clicking the
VSPA-D7 shortcut on the Windows desktop.
The VSPA-D7 main window appears as follows:
1
Remove all check marks.
2
Click [OK].
1
Remove check marks.
2
Place a check mark.
3
Make settings according to
the instructions of your
network administrator.
4
Click [Advanced].
1
Enter all IP addresses for players in the “Do not
use proxy server for addresses beginning with:”
text box. Add a ; (semi colon) if multiple IP
addresses are entered.
Use an * (asterisk) as a wild card. In this
example, “192.168.1.1” to “192.168.1.254” are
specified.
2
Click [OK].