28
Specifications
Specifications
Input/output
Network
10BASE-T/100BASE-TX
(connection speeds may differ,
depending on the network
environment)
Memory card slot
SDHC
USB
Hi-Speed USB
(USB 2.0 compliant)
General
Dimensions
200
×
33
×
139 mm (7
7
/
8
×
1
5
/
16
×
5
1
/
2
in.) (W/H/D) (excluding
protrusions)
Mass
Approx. 800 g
(28 oz.)
Power consumption
Approx. 14 W
Inrush current (1) Maximum possible inrush
current at initial switch-on
(Voltage changes caused by
manual switching): 48.5 A
peak, 6.5 A r.m.s. (240V AC)
(2) Inrush current after a mains
interruption of five seconds
(Voltage changes caused at
zero-crossing): 7.5 A peak,
2.5 A r.m.s. (240V AC)
Operating temperature
0
°
C to 40
°
C
(32
°
F to 104
°
F)
Storage temperature
–20
°
C to +55
°
C
(–4
°
F to +131
°
F)
LAN indicators
Link (green)/Act (orange)
Cable length
Max. 100 m (328 ft.)
(Category 5e)
Supplied items
Installation Manual (this manual)
Startup Guide
Media List
Cable tie holder
Vertical stand
CD-ROM (Software & Manuals
for Digital Signage Player)
AC adapter
Recommended power cord
For USA and CANADA only
Part No. 1-757-562-1X
For Europe only
Part No. 1-575-131-8X
For Oceania only
Part No. 1-555-074-5X
Design and specifications are subject to
change without notice.
Notes
• Always make a test recording, and verify
that it was recorded successfully.
SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY OTHER
MEDIA OR STORAGE SYSTEMS TO
RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating
properly before use. SONY WILL NOT
BE LIABLE FOR DAMAGES OF ANY
KIND INCLUDING, BUT NOT
LIMITED TO, COMPENSATION OR
REIMBURSEMENT ON ACCOUNT OF
THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO
FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD
OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
