Removing the Projection Lens VPLL-3003
31
Removing the Projection
Lens VPLL-3003
1
Return the projection lens to the center position.
While the projector is turned on, press the LENS
SHIFT button on the Remote Commander, then
press the RESET button on it. The projection lens
returns to the center position.
2
While pressing and holding down the LENS
RELEASE button, rotate the projection lens
counterclockwise (
1
) to pull out the lens straight
(
2
).
Note
When removing the projection lens, carry it
grasped with both hands as shown in the
illustration.
Note
When removing the projection lens, put the projector
down on the floor.
• The projection lens cannot be removed unless it has
returned to the center position.
• Do not remove the AC power cord while the power
is shutting down because the lens moves to the
center position just before the power is shut down.
LENS RELEASE
button
Top of surface of the projector
Index
