20
Cinema Black Pro
Advanced Iris and Laser
Setting
[ADVANCED IRIS]
Dynamic Control:
Adjusts the range of the laser light and iris (diaphragm).
Full:
Automatically adjusts the laser light, iris (diaphragm), and signal processing according to the
brightness level of the input source and optimizes the amount of light. This results in a bright and high
contrast image.
Limited:
Compared to “Full,” it suppresses the movement and brightness of the laser light and iris
(diaphragm). This is suitable for viewing a picture in a dark room.
Off:
The “Dynamic Control” function is not applied.
Laser Light Output:
The higher the setting, the brighter the picture. The lower the setting, the darker
the picture.
Tip
Adjust “Laser Light Output” according to the brightness of the picture.
Contrast Enhancer
[CONTRAST ENHANCER]
Corrects the level of bright and dark parts automatically to optimize contrast according to a scene.
Increases image sharpness and makes image dynamic.
High/Middle/Low:
You can adjust the contrast enhancer.
Off:
The contrast enhancer function is not applied.
Motionflow [MOTIONFLOW]
Impulse:
Reproduces original picture quality. Provides cinema-like picture, which may flicker.
Combination:
Reduces motion blur while maintaining brightness for high-speed picture content.
Smooth High:
Provides smoother picture movement; especially effective for film-based content.
Smooth Low:
Provides smoother picture movement for standard use.
True Cinema:
Images, such as a movie created in 24 frames per second, are reproduced at the original
framerate.
Off:
The “Motionflow” function is not applied.
Tips
• Select “Off” if the selected “Smooth High,” “Smooth Low,” “Impulse,” “Combination,” or “True
Cinema” results in a distorted picture.
• When selecting “Impulse,” the picture becomes dark. Also, it may flicker.
• Depending on the picture content, you may not see the effect visually even if you have changed the
settings.
• Only “Off” or “Impulse” is available when a signal with a resolution of 4096 × 2160 is input.
Contrast
[CONTRAST]
Adjusts the contrast.
Higher values increase the sharpness in images, while lower values decrease the sharpness.
“Contrast(HDR)” appears instead of “Contrast” for the following cases:
- When the HDR signal is input with “Auto” set for HDR
- When “HDR” is set to “HDR10,” “HDR Reference,” or “HLG”
Brightness
[BRIGHTNESS]
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the darker the picture.
Color
Adjusts the color density.
The higher the setting, the greater the intensity. The lower the setting, the lower the intensity.
Hue
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower the setting, the more reddish
the picture becomes.
Color Temp.
[COLOR TEMP]
Adjusts the color temperature.
D93:
Equivalent to 9,300 K color temperature normally used in TVs. Gives white colors a blue tint.
D75:
Equivalent to 7,500 K color temperature used as an ancillary standard illuminant. Gives a neutral
tint between “D93” and “D65.”
D65:
Equivalent to 6,500 K color temperature used as a standard illuminant. Gives white colors a red
tint.
DCI:
DCI specification (page 41) color temperature.
D55:
Equivalent to 5,500 K color temperature used as an ancillary standard illuminant. Gives white
colors an even redder tint.
Custom 1 to 5:
Enables you to adjust, set, and store your favorite color temperature.
The factory default settings are as follows.
Custom 1:
Same as the “D93” color temperature setting.
Custom 2:
Same as the “D75” color temperature setting.
Custom 3:
Same as the “D65” color temperature setting.
Custom 4:
Same as the “DCI” color temperature setting.
Custom 5:
Setting that prioritizes brightness.
Tip
You can adjust each item to a color temperature according to your preference.
Setting items
Description
Summary of Contents for VPL-VW5000ES
Page 53: ...Sony Corporation ...
