manualshive.com logo in svg

Sony VPL-GTZ280, Operating Instructions Manual

The Sony VPL-GTZ280 is a cutting-edge projector designed to deliver stunning visual quality. Unlock its full potential by downloading the Operating Instructions Manual, available for free on our website, providing step-by-step guidance for seamless integration and optimum performance. Experience excellence with Sony and enhance your viewing experience.

Share
Download
background image

39

Updating the Software

You can download files to update the software of the unit. 
Copy the downloaded files to your USB memory, insert the 
USB memory to the USB terminal of the unit, then 
perform the update.
To use the features updated, insert a USB memory device 
into a PC connected to the internet.
Download the update files from the Sony website.

Some USB memories may not be supported for use.

NOTICES AND LICENSES 
FOR SOFTWARE USED IN 
THIS PRODUCT

Refer to “Software License Information” supplied 
separately.

Others

Note

Trademark Information

• “Blu-ray” and “Blu-ray Disc” are trademarks of 

Blu-ray Disc Association.

• DisplayPort, DisplayPort logo and VESA are 

trademarks or registered trademarks of Video 
Electronics Standards Association.

Summary of Contents for VPL-GTZ280


















































Reviews:

No comments

Related manuals for VPL-GTZ280

ACCO Brands NOBO User Manual preview
NOBO
Brand: ACCO Brands Pages: 31
Sven Optima pro Manual preview
Optima pro
Brand: Sven Pages: 4
BenQ 9H.JMT77.25E User Manual preview
9H.JMT77.25E
Brand: BenQ Pages: 84
Lea LS Plus 300 Installation Manual preview
LS Plus 300
Brand: Lea Pages: 12
Polaroid 215EPolaview User Manual preview
215EPolaview
Brand: Polaroid Pages: 75
CyberPower P4WSU User Manual preview
P4WSU
Brand: CyberPower Pages: 2
Patton electronics 570-R8 User Manual preview
570-R8
Brand: Patton electronics Pages: 7
BenQ MP610 - SVGA DLP Projector User Manual preview
MP610 - SVGA DLP Projector
Brand: BenQ Pages: 55
Epson 7600 - EMP XGA LCD Projector User Manual preview
7600 - EMP XGA LCD Projector
Brand: Epson Pages: 10
Panasonic PT-L520E Operating Instructions Manual preview
PT-L520E
Brand: Panasonic Pages: 30
Philips SPS2700WA Features preview
SPS2700WA
Brand: Philips Pages: 1
Philips SPP8038B User Manual preview
SPP8038B
Brand: Philips Pages: 10
Philips SPR4500/05 User Manual preview
SPR4500/05
Brand: Philips Pages: 122
Barco Cooler rigging frame Installation Manual preview
Cooler rigging frame
Brand: Barco Pages: 13
Elite Screens WB60V User Manual preview
WB60V
Brand: Elite Screens Pages: 12
Elite Screens Yard Master Electric Adjustment Instructions preview
Yard Master Electric
Brand: Elite Screens Pages: 3
Elite Screens VMAX84UWH2-E30 Quick Start Manual preview
VMAX84UWH2-E30
Brand: Elite Screens Pages: 15
Elite Screens VMAX84UWH2 Manual preview
VMAX84UWH2
Brand: Elite Screens Pages: 16

Brands by name

Popular brands

Load more brands