11
Connecting the Projector
P
re
par
a
tio
n
To fix the HDMI cable
Fix the cable to the cable tie holder at the bottom of the projector, using a commercially
available cable tie, as in the illustration.
Use a cable tie of less than 1.9 mm × 3.8 mm in thickness.
OUTPUT
Projected images can be output to display equipment such as a monitor.
This terminal outputs the image. Output as a computer signal input from the RGB input terminal
(INPUT A, INPUT B) or a video signal input from the YP
B
P
R
input terminal (INPUT A).
• You can connect HDBaseT equipment by attaching the Digital Interface Adaptor BKM-PJ10
(not supplied).
• When the Digital Interface Adaptor BKM-PJ10 (not supplied) is attached to the main unit,
image transmission to the main unit, LAN communication, and RS-232C control are enabled
with the commercially available HDBaseT transmitter. Not compatible with voice
communication and power connection.
Connecting an External Monitor
Bottom of the projector
Cable tie
(commercially available)
Cable tie holder
Note
Connecting to HDBaseT™ equipment
Mini D-sub 15-pin cable
(not supplied)
RGB input
terminal
Display equipment
Summary of Contents for VPL-FHZ700
Page 63: ...Sony Corporation ...
