30
Aspect
*1: If you select “Normal,” the image is
projected in the same resolution as the
input signal without changing the aspect
ratio of the original image.
*2: If you select “Full 2,” the image is
projected to fit the projected image size,
regardless of the aspect ratio of the image.
*3: Depending on the input signal, the
projected image may be projected as
illustrated below. In this a case, select
“16:9.”
*4: Depending on the input signal, the image
may be projected as illustrated below. In
this a case, select “Zoom.”
*5: If you select “Full,” the image is projected
to fit the projected image size, regardless
of the aspect ratio of the image.
Input signal
Recommended
setting value and
projected image
C
o
m
p
ut
er
s
ig
n
a
l
(4:3)
(Full 1)
*1 *2
(16:9)
(Full 1)
*1 *2
(16:10)
(Full 1)
*1
V
ide
o
si
gn
al
(4:3)
(4:3)
*3 *5
(16:9)
(16:9)
*4 *5
