Sony VPL-FHZ101L Operating Instructions Manual Download

Page: 19 / 64

Press the KEYSTONE key on the Remote
Commander once or select “Screen Fitting” in
the Installation menu (page 33).

Select “Warping.”
The guide is displayed.

When correcting the corner(s) of the image

Move



using









to select the corner

you want to correct.

Press the ENTER key.
The cursor appears.

Adjust the position of the corner you want to
correct, using









Press the RESET key to restore the projected
image before adjustment.

When correcting deflection on the left/right side
of the image

Move



using









to select the side you

want to correct.

Press the ENTER key.
The cursor appears.

Adjust the deflection of the side, using









You can adjust the center point of deflection
using





. For the range of deflection, use





. You can separately adjust the left/right

side.

Press the RESET key to restore the projected
image before adjustment.

Correcting Image Twist (Warp Correction
Feature)

Adjust using this cursor

Summary of Contents for VPL-FHZ101L

































































Search results

Summary of Contents for VPL-FHZ101L

Reviews:

Related manuals for VPL-FHZ101L

Brands by name

Popular brands

Sony VPL-FHZ101L, Operating Instructions Manual

Search results

Summary of Contents for VPL-FHZ101L

Reviews:

Related manuals for VPL-FHZ101L

Brands by name

Popular brands