33
Using a MENU
A
d
ju
s
tm
e
nt
s an
d Set
tin
g
s
U
s
in
g a M
enu
B
Adjustments and Settings Using a Menu
Using a MENU
The projector is equipped with an on-screen
menu for making various adjustments and
settings. Some of the adjustable/setting
items are displayed in a pop-up menu, in a
setting menu or adjustment menu with no
main menu, or in the next menu window. If
you select an item name followed by an
arrow (
B
), the next menu window with the
setting items appears.
To change the on-screen menu language, see
“Selecting the Menu Language” on page 28.
Display items
There are explanations for VPL-CX100,
VPL-CX120, VPL-CX125, VPL-CX150
and VPL-CX155 all together in this manual.
Be please aware that VPL-CX155 is mainly
used for explanation of the display, and there
may be an item that is not displayed due to
the model.
1
Press the MENU key.
The menu appears.
2
Use the
v
or
V
key to select a menu,
then press the
B
or ENTER key.
The items that can be set or adjusted
with the selected menu appear. The item
presently selected is shown in yellow.
3
Select an item.
Use the
v
or
V
key to select the item,
then press the
B
or ENTER key.
The setting items are displayed in a pop-
up menu, in a setting menu, in an
adjustment menu or in the next menu
window.
4
Make the setting or adjustment of an
item.
• When changing the adjustment
level:
To increase the number, press the
v
or
B
key.
To decrease the number, press the
V
or
b
key.
Press the ENTER key. The setting or
adjustment done is stored and the
previous screen is restored.
• When changing the setting:
Press the
v
or
V
key to select the
setting.
Press the ENTER or
B
key to restore
the previous screen.
Sel:
Set:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Lamp Mode:
Standard
High Altitude Mode:
Off
IR Receiver:
Front & Rear
V Keystone:
Auto
Side Shot:
0
Image Flip:
Off
Background:
Blue
ID Mode:
All
Direct Power On:
Off
Sel:
Set:
Back:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Status:
Language:
Input-A Signal Sel.:
Auto
Lamp Timer Reset
Color System:
English
On
Auto
NTSC3.58
PAL
SECAM
NTSC4.43
PAL-M
PAL-N
Items that can
be set
Pop-up menu
Setting menu
Adjustment menu
Sel:
Set:
Back:
Exit:
Picture
Signal
Function
Setup
Installation
Information
Adjust Picture
Standard
Contrast:
80
Brightness:
50
Gamma Mode:
Color Temp.:
High
Graphics
50
Sharpness:
Items that can
be set
Next menu window
Summary of Contents for VPL CX125 - XGA LCD Projector
Page 69: ...Sony Corporation ...
